Assembly guide

Floor model

The tree assembles without tools or screws.

Bamboo is a natural material, and each tree is made by hand, so some variation is to be expected.

The tree consists of a trunk, three legs and 24 branches.

Fit the three legs into the trunk first, with the flat sides facing the floor. Try the legs in different positions if needed to get the trunk as upright as possible.

For a classic Christmas tree shape, place the longest branches at the bottom and use progressively shorter branches as you work upwards. You can also assemble the branches in the reverse order, working from the top down.

All branches and the corresponding holes in the trunk are 15 mm in diameter, so you can arrange the branches however you like. There are four of the shortest branches and four sets of five branches in increasing lengths: five different lengths in total.

We have chosen not to use screws or other metal parts. In very dry conditions, the joints between the three legs and the trunk may loosen, making the tree less stable. Small wooden wedges can help, or you can permanently glue the legs into the trunk using ordinary PVA wood glue.

Please note: Gluing the legs in place creates permanent joints, so they can no longer be removed for storage in the same way.